MikroKopter - Forum » Newbie » MX-20: Control-stick without function

MX-20: Control-stick without function

Neues Thema GESCHLOSSEN

Seite: 1

Autor Neuer Beitrag
Mitglied
Registriert seit: May 2011
Beiträge: 29
Ort: Gelsenkirchen / NRW / Germany
Hi,

it can happen that from time to time one of the both control-stick has no function in one or the other direction. Here is the appropriate control-stick / direction no longer calibrated.
That can happen if you do "experiments" with the calibration, but to answer the question before: That will be NOT HAPPEN during a flight.
Has a control-stick no function at all you can check the function under "Servo Display" at your transmitter.
If there is no reaction/peak the appropriate control-stick need to be calibrated again.
Just open the HIDDEN MODE at your transmitter and do the calibration.

In the Wiki under "HoTT" you will find HELP to check on it and how to calibrate. (Sub-Point #9)
www.mikrokopter.de/ucwiki/en/HoTT

You can find also help in the instruction manual of the transmitter on the pages 28/29/30.
« Bearbeitet von dl2yak am 25.01.2012 11:00. »
Mitglied
Registriert seit: Jan 2012
Beiträge: 9
Hello there,
my MX20 had almost the same issue... It was a short-circuit (the tx fall to the ground from a seat)
I'm happy it made my left stick NOT to be used anymore (I prefer Graupner service than my Mk falling from the sky like a brick !!!)

Happy landings
Ivano

Neues Thema GESCHLOSSEN

Seite: 1

MikroKopter - Forum » Newbie » MX-20: Control-stick without function