MikroKopter - Forum » MikroKopter - general » Shop-News. New Items

Shop-News. New Items

Neues Thema GESCHLOSSEN

Seite: 1

Autor Neuer Beitrag
Entwickler, Admin
Registriert seit: Feb 2006
Beiträge: 5784
Ort: Ostfriesland
New Items in the Shop. Please subscribe this thread if you want to stay informed about new items.

New Cover:
externer Link:
User image

It is a bit higher (15mm) and thicker than the older model.
Black & Transparent

Carbon Centerplates:
externer Link:
User image

Hexa Okto

Futaba S.Bus Receiver
externer Link:
User image

Incl. required Signal Inverter. Output of 7-12 channels (depending on your transmitter)
Informations how to connect

Aluminium Spacers
User image User image
30mm 40mm
Perfect for the Lipo-Holder set. The lower thread is longer than the plastic spacers so that you can easily attach the camera mount.
Entwickler, Admin
Registriert seit: Feb 2006
Beiträge: 5784
Ort: Ostfriesland
Wireless KopterTool Telemetry (Bluetooth 500m)

User image

Now we can offer this set completely assembled and programmed - ready for use.
Shop

5.8GHz Video equipment:

externer Link:
User image
externer Link:
User image
externer Link:
User image
[usw....]

SHOP-Link
« Bearbeitet von HolgerB am 01.08.2012 16:11. »
Entwickler, Admin
Registriert seit: Feb 2006
Beiträge: 5784
Ort: Ostfriesland
LANC-Ctrl (Camcorder control)
externer Link:
User image

Video
For cx730/cx760 and compatible

Lipo-Y-Cable
externer Link:
User image


Molex Video Adapter
externer Link:
User image

(Vor easy connect to our 5.8GHz-Transmitters)
Entwickler, Admin
Registriert seit: Feb 2006
Beiträge: 5784
Ort: Ostfriesland
LipoSaver e.g. for supplying monitors etc.
externer Link:
User image

Undervoltage warning (buzzer) and -auto-switch-off.
Wiki-Link
Shop-Link
---------------------------------------------------------------------------------------------
7" Monitor with sun shield, Audio input and perfect cable set
externer Link:
User image

On the monitor the video receiver and lipo can be directly mounted . It also has a mount for a tripod screw.
User image User image

Features:
* Direct connection to Iftrontech-5.8GHz video receivers
* Second video output or input
* Audio input e.g. for connecting the voice output of the MX-20. The voice even works without video signal (!)
* Built-in LiPoSaver - > Prevents lipos from deep discharging if you would forget to disconnect the Lipo
Shoplink

---------------------------------------------------------------------------------------------

Ready built Okto-XL (ARF-Version)
User image
The OktoXL is almost assembled, only simple mechanical assembly work is required (mounting propellers, landing gear and LiPo holder) (see video)
All electrical and electronic components are already installed, configured and tested. The package includes FlightCtrl, Navi-Ctrl and MK-GPS.

The ARF Okto XL is already pre-configured for our RC-transmitters (MX-20 and MC-32) (mode 2).
A commercial license for the software of the MikroKopter with a GPS radius of 500m and 100 waypoints is also included.
Compared to our normal sets, this Okto has a stiffer frame with stronger riggers and carbon parts.

User image User image User image

Video of the assembling:
externer Link:
User image


Shoplink
Wiki-Link
« Bearbeitet von HolgerB am 01.10.2012 21:39. »
Entwickler, Admin
Registriert seit: Feb 2006
Beiträge: 5784
Ort: Ostfriesland
very soft vibration dampers with 20mm

externer Link:
User image


Perfect to decouple the camera mount or the lipo-holder.

---------------------------------------------------------------------------------------------

Mini-Camera holder for our camera mounts SLR1&2
externer Link:
User image


---------------------------------------------------------------------------------------------

CFK-Propellers 14"
externer Link:
User image


Right
Left

Fitting for Quadro-XL (too big for Okto-XL)

---------------------------------------------------------------------------------------------
Mini-Okto incl. Transmitter

externer Link:
User image


It flys almost like the "real" OktoKopter. Perfect for indoor-training.



All new products....
« Bearbeitet von IngoB am 16.10.2012 20:25. »
Entwickler, Admin
Registriert seit: Feb 2006
Beiträge: 5784
Ort: Ostfriesland
Graved aluminum plates for the MC-32

User image
User image
Shop link

Transmitter desk (pult) for MC-32 with monitor mount

externer Link:
User image


User image

It is the perfect ground station with our Monitor incl. Video revceiver

Shop link
Entwickler, Admin
Registriert seit: Feb 2006
Beiträge: 5784
Ort: Ostfriesland
Poloshirt and Hoody in Black
externer Link:
User image


13" CFK-Propeller
externer Link:
User image

Perfect for Hexa-XL and Quadro-XL

All sizes of the Maxxprod-Propellers now also with Nylon (Version NY).
externer Link:
User image

That made them much more stable.
Entwickler, Admin
Registriert seit: Feb 2006
Beiträge: 5784
Ort: Ostfriesland
LANC-Ctrl V1.1 - Interface for Sony-Camcorder

externer Link:
User image

This version needs less cables than the older version. The video-transmitter can be connected directly.

Spacewalker in Okto-XL-Look (New hood)
externer Link:
User image


The hood is also available as single part (for Ladybird wtc.)
- Hood black
- Hood transparent


Single WI232-Modul as spare part
externer Link:
User image
« Bearbeitet von HolgerB am 08.03.2013 12:58. »
Entwickler, Admin
Registriert seit: Feb 2006
Beiträge: 5784
Ort: Ostfriesland
New FlightControl for better Altitude-hold
externer Link:
User image

Shoplink

ACC-Adapter board to upgrade FC2.1

User image
Shoplink
More information in the Wiki


Jeti DC-16

User image

We have the DC-16 transmitter with springs in the both sticks! (we call it: !mode5!) . That makes the flying with the new altitude control very comfortable.
The Transmitter supports the MikroKopter telemetry with speech output. It speakes the typical stages like "Altitude on", "GPS-On",... as well as the values of the telemetrs (Altitude, distance, voltage,...)

Shoplink
« Bearbeitet von HolgerB am 29.04.2013 18:11. »
Entwickler, Admin
Registriert seit: Feb 2006
Beiträge: 5784
Ort: Ostfriesland
bargain offer: GPS-Shield V1.0

externer Link:
User image

Shoplink

The MikroKopter has much better GPS position-hold with a GPS Shield.
Especially in the currently prevailing solar storms it brings a significant improvement.

Note: This version V1.0 works just as well as the newer V1.1, which is slightly different from the dimensions.
Entwickler, Admin
Registriert seit: Feb 2006
Beiträge: 5784
Ort: Ostfriesland
Video glasses Cinemizer OLED
externer Link:
User image

The video glasses have a AV-Video input and it comes with an own batterie pack. It can be directly connected to our video receivers

Jeti DS-16

externer Link:
User image


Jeti DS-16 is a 2.4GHz transmitter with 16 channels.
Special Version for MikroKopter: Mode 5 = Both sticks (also the gas-stick) with spring!

Back in stock: ACC-Upgrade
externer Link:
User image
« Bearbeitet von HolgerB am 13.05.2013 16:45. »
Entwickler, Admin
Registriert seit: Feb 2006
Beiträge: 5784
Ort: Ostfriesland
RangeExtender

externer Link:
User image


The perfect wireless connection between PC, Smartphone or Tablet to the MK.
The RangeExtender communicates via Wi232 (868 or 900MHz) with the MikroKopter (2km Range)
A PC can be connected via the integrated USB interface.
An Android tablet connects via BlueTooth to the range extender.

It is available in 4 different frequencies.
Note: Channel 1 is the frequency at which we have previously sold in the Wi-232-Set set.

Android-App: MikroKopter Tablet Tool

externer Link:
User image


The App can be downloaded in the GooglePlaystore. You can test it for free.

For use with the MK you need a RangeExtender - load / save and Offlline maps are activated with the connectoion of the RangeExtender.
Who has a self-built range extender, can acquire an ID to use it.
Entwickler, Admin
Registriert seit: Feb 2006
Beiträge: 5784
Ort: Ostfriesland
SONY-Multi-Adapter VMC-AVM1

Adapter from old LANC to newer Multi connection (e.g. Sony CX410, PJ650, PJ780, ...)
externer Link:
User image


Sony LANC-Ctrl V1.1 + Multi - Adapter
externer Link:
User image


Wiki-documentation of the camcorder control via LANC
Entwickler, Admin
Registriert seit: Feb 2006
Beiträge: 5784
Ort: Ostfriesland
New FlightControl V2.5

externer Link:
User image


This is new:

User image

Altitude sensor
1. new pressure sensor
1.1 light & windshield integrated
1.2 altitude measurements up to 5000m

ACC-Sensor
2.1 New ACC-Sensor (like in the ACC-Upgrade)
2.2 better altitude stability
2.3 better resitance against vibrations (all axis)

Others
3.1 up to 6S Lipo supply (25V)
3.2 LEDs at the switching outputs
3.3 protections on the servo-outputs
3.5 400uF capacity buffer for the servo voltage
3.6 Note: Only compatible since firmware FC 2.00e - no older firmwares supported

Shop link
Entwickler, Admin
Registriert seit: Feb 2006
Beiträge: 5784
Ort: Ostfriesland
New series of brushless controllers V3

User image

They are not only mor powerful, they are even much faster and have active braking.
--> the MK will become much more stable

These are the different types:
Single BL V3
Okto BL V3
Quadro BL V3
Double-Quadro BL V3 (Also für Oktos)

Also new:

Lipo 6S-Flat
externer Link:
User image

3300mAh und 4500mAh

Motor MK3644
externer Link:
User image


The motors are balanced with mounted propeller-adater.

Mit 5mm Propeller-Mitnehmer
Mit 6mm Propeller-Mitnehmer

Okto-set now with BL V3

externer Link:
User image
Entwickler, Admin
Registriert seit: Feb 2006
Beiträge: 5784
Ort: Ostfriesland
Okto-BL-ESC "Double Quadro V3 Cool"

With integrated heatsink.

User image

User imageUser image

power
* voltage : 10 to 30V -> 3 -7S Lipo
* 6 -layer PCB for optimal heat dissipation . 70u copper layers make the entire circuit board to the heat sink .
* current: up to 60A (per BL-Unit) and 240A (all together) with appropriate cooling
* current limiting and temperature limiting
* Active freewheeling -> less power loss

Fast response with speed control
* rapid acceleration and braking of the propeller. Active and seamless braking gives the speed precisely and quickly on the new setpoint .
* return energy to the lipo when braking. Seamless transition from acceleration to braking
* significantly faster control with speed control

Shoplink
Entwickler, Admin
Registriert seit: Feb 2006
Beiträge: 5784
Ort: Ostfriesland
Mini-QuadroCopter as toy and for indoor training

User image


Hexa-Combi Brushless-Controller V3
externer Link:
User image


Extremly fast and powerful.
The new BL V3 controllers make a big difference in flight stability.

External Compass
User image

This sensor can be placed with a bigger distance to magnetic disturbances.

NaviControl with external compass
externer Link:
User image
Entwickler, Admin
Registriert seit: Feb 2006
Beiträge: 5784
Ort: Ostfriesland
HDMI / AV - Konverter

externer Link:
User image



Solder free Okto set

All you need is a screwdriver to set up your new EasyOktoXL.
Solderings are not required. All components can be bolted and / or plugged.

User image

Now it even fits in your suitcase - just assemble the MK in the hotel room...
Entwickler, Admin
Registriert seit: Feb 2006
Beiträge: 5784
Ort: Ostfriesland
MKGPS V3

externer Link:
User image

For the best GPS performance it receives and uses the GPS (USA) and Glonass (Russian) satellite system simultaneously.

Shop-Link
Entwickler, Admin
Registriert seit: Feb 2006
Beiträge: 5784
Ort: Ostfriesland
LipoDecoupler

externer Link:
User image


User image


With this decoupler it is more safe to connect two or more Lipos in parallel. It prevents a total power loss in the case that one Lipo makes a shortcut.
Basically it acts like a smart diode with (almost) no power loss.
A high reverse current would happen in case of a short circut of one Lipo. This Lipo would be disconnected in that case and can't pull down the Voltage of the other Lipos.
The PCB also prevents high charging currents if someone connects a full lipo parallel to an empty lipo.

But our LipoDecoupler can even more: it allows a reverse current of 10A and switches off if the current goes over 10A.
With the limited reverse current, the active braking of the propellers is not effected -> the power of the rotating propellers can still go back into the Lipo.

Data:
- 50A continuous current per PCB (even more if cooled)
- two LipoDecoupler can be connected parallel on one Lipo to increase the Current
- 150A peak sucessfully tested (15 Sek)
- impendance: 0,5mOhm (0,0005Ohm)
- Voltage loss: 0,02V at 40A
- Power loss: 1,0W at 40A

Reverse current:
- reverse currents below 10A are possible. It switches off fater than 1ms in case of reverse overcurrent >10A
- In case of switch off, the PCB would switch on again if the current goes back in foreward direction. So, it can never happen, that they would remain switched off in case of a short shortcut.

One LipoDecoupler is needed for every Lipo.
Minimum number of Lipos: 2
Maximum number of Lipos: not limited

Basically it was designed for our Austrian customers. There this kind of pretection is needed by law. Other countries will follow.

Link into the Shop
Entwickler, Admin
Registriert seit: Feb 2006
Beiträge: 5784
Ort: Ostfriesland
CamCtrl for SONY cameras

User image

Shoplink

It is an improved LANC-Interface which supports the new SONY Multi protocol.
So, it supports the Sony Alpha series like a5000/a6000 or the DSLR

The new CamCtrl will be connected to the I2C-Bus Molex Connector of a NaviControl
In Addition, the CamCtrl still has the PPM-Inputs (if required).

Features:
- Start/Stopp Video
- Trigger Photos
- Zoom
- switch on the camera automatically
- avoid Sleep-mode of the camera
- PAL Output (only the camcorders with LANC have PAL)
- external Status LED can be connected

The CamCtrl shows the status of the camera and shows it in the HoTT/Jeti/KopterTool telemetry

Example
User image User image

-> "R" means: REC
-> "4" means -> x photos taken
Entwickler, Admin
Registriert seit: Feb 2006
Beiträge: 5784
Ort: Ostfriesland
Flight Control V3.0

User image

Shop link

FlightControl with integrated NaviControl

* Proven technology with additional features
* Compatible with FlightControl and NaviControl Software
* Servo outputs now on separate board (small and big Version)
* Connecting a trigger input (hot shoe contact) -> camera trigger positions are logged in a separate logfile
* Three separate I2C buses -> BL-controller, Compass, camera control etc.
* Free serial port, for example, to connect to RTK GPS systems (by later software updates)
* Three analog inputs -> the values are recorded in the log file
* Connection for CAMCtrl -> interface for SONY cameras incl Zoom and feedback to the transmitter (REC, counters for photos, etc.)
* Redundant serial data bus to the BL-V3 controllers (even with a single FC)
* CAN bus: for connecting a redundant flight control or other modules

MKGPS V3.5 with two integrated compass sensors

User image

Shoplink

The latest receiver generation with GPS / Glonass / BeiDou reception

For redundant setup: With two integrated compass sensors and two GPS connection terminals

User image
« Bearbeitet von HolgerB am 16.02.2016 16:52. »
Entwickler, Admin
Registriert seit: Feb 2006
Beiträge: 5784
Ort: Ostfriesland
Laser Sensor

externer Link:
User image


Shoplink

The laser sensor measures the distance to an object in cm.
The value is displayed and stored in the logfile.
It is e.g. for doing measurements by camera.
For example: Marine researchers use it for determine the size of whales

User image

The values are displayed here:
- Analogdata
- virtual display
- Logfile (camera log and GPX)
- HoTT-Telemetry

This is how a logfile looks like when crossing a house:

User image
Entwickler, Admin
Registriert seit: Feb 2006
Beiträge: 5784
Ort: Ostfriesland
Galileo-GPS-Module (MKGNSS V4)

The Galileo-GPS-Module (MKGNSS V4) are available in our Shop now.

User image

They support
* GPS (USA)
* Galileo (EU)
* Glonass (Russland)
* Beidou (China)

User image

(Galileo satellites are displayed in blue color and have an Europe flag sign)


You need firmware 2.18

Neues Thema GESCHLOSSEN

Seite: 1

MikroKopter - Forum » MikroKopter - general » Shop-News. New Items