MikroKopter - Forum » Construction » tips tricks for cinematography ?

tips tricks for cinematography ?

Neues Thema Antwort

Seite: 1

Autor Neuer Beitrag
Mitglied
Registriert seit: Jun 2009
Beiträge: 545
Hello my friends,
I need your advises

What do you suggest newbies of cinematography?Not newbies to flying.

it can be on subjects;
Camera
video camera
battery packs
frame kits
camera mount
motor
propeller

or any advise.

regards
« Bearbeitet von sedatozturk am 20.03.2013 13:40. »
Mitglied
Registriert seit: Sep 2011
Beiträge: 1181
Ort: südlich des Weißwurstäquators
....and a lot of time to learn to fly before you mount your camera :-)
Mitglied
Registriert seit: Oct 2010
Beiträge: 1482
Ort: Copenhagen, Denmark
Santa_Matze meinte
....and a lot of time to learn to fly before you mount your camera :-)


That's probably the best piece of advice for new people :)
Mitglied
Registriert seit: Jun 2009
Beiträge: 545
I am already flying for four years by the way...
for two years with canon g12 camera...
Mitglied
Registriert seit: Jun 2009
Beiträge: 545
I am thinking to buy cinestar 8 with camera gimbal for cinematography reasons,
With FC2.1 navi bl-ctrl2.0
Battery pack will be 2*5000mah turnigy nanotech 5s 45c-90c (or may be 6s?)
camera canon 5dmk2
video camera : not decided yet
motor: mk 3638
propeller apc 13*6,5
Mitglied
Registriert seit: Sep 2011
Beiträge: 1181
Ort: südlich des Weißwurstäquators
o.k., then use your existing copter, mount a gimbal and your camera underneath, switch to record and take off.

If you want to have a downlink of your video signal you need:
Video-transmitter
connecting-cables
Video-groundstation with receiver and monitor

If you want to control your camera autarchic and with the pan-axis you need in addition:
3d-gimbal
gimbal-control-board
2. radio-control-unit (Rx, Tx from a different brand to your flight-system)
battery, UBEC
Mitglied
Registriert seit: Jun 2009
Beiträge: 545
I have okto-xl and MK HiSight III (Bridge)

I have also 1 futaba (7ch) and 1 graupner (mx20) both of them 2.4ghz

I am on my way to buy video downlink (5.8GHz) lcd and video googles

But the MK HiSight III (Bridge)is not really nice enough and not really professional.it is really shaking the camera so the video is not stable. May be I do some wrong setting on servos I am not sure.when I move to right or left it shakes a lot. when I am on groud and testing the gimbal servos seems working good enough.
Mitglied
Registriert seit: Sep 2011
Beiträge: 1181
Ort: südlich des Weißwurstäquators
not the gimbal shakes your camera - the non-well-balanced propellers does this. Eliminate the vibrations, mount your camera on Gel-dampers and you can get smooth videos even with HiSight III.
There are many pilots with your Gimbal producing good videos.
Mitglied
Registriert seit: Jun 2009
Beiträge: 545
what about settingsof servos? how can I make it smoother?
anyway I will build another frame.do you haveany suggestion on the new frame or gimbal
Mitglied
Registriert seit: May 2012
Beiträge: 325
to get some inspiration have a look at these two threads:
http://forum.mikrokopter.de/topic-21136-1.html
http://forum.mikrokopter.de/topic-24170.html
Mitglied
Registriert seit: Oct 2010
Beiträge: 1482
Ort: Copenhagen, Denmark
sedatozturk meinte
what about settingsof servos? how can I make it smoother?
anyway I will build another frame.do you haveany suggestion on the new frame or gimbal


You could increase the value of "Servo refresh rate". That would make the response a little smoother ( but also potentially slower).

With regards to your gimbal, then get a new one (something like av130 or wait 1-2 months, and a collegue and I will have a kick-ass one ready), and get a Picloc. The MK stabilization isn't good enough, and not enough parameters to change.
Mitglied
Registriert seit: Jul 2015
Beiträge: 5
canon g12 is really worthwhile
Mitglied
Registriert seit: Aug 2007
Beiträge: 653
Ort: Hamburg
If you want to invest some money to lift you to a professional level, then I would suggest to buy a Freefly ALTA and a MoVI M5.
Ok thats an investment of about $12.000 but its far more better than a Cinestar8 with an AlexMos-Gimbal for half the price.
Mitglied
Registriert seit: Apr 2007
Beiträge: 2344
Ort: Hesel
@ Haydar:
Take a look at here:
http://forum.mikrokopter.de/topic-post542946.html#post542946
Mitglied
Registriert seit: Aug 2007
Beiträge: 653
Ort: Hamburg
Ups,
ok, das nächste mal besser die Augen auf
Mitglied
Registriert seit: Jun 2009
Beiträge: 545
after a few years not writing anything on forum, I saw that someone reply to my post :D funny
Mitglied
Registriert seit: Feb 2012
Beiträge: 1857
It is interessting how outdatet this is, after only a few years

Neues Thema Antwort

Seite: 1

MikroKopter - Forum » Construction » tips tricks for cinematography ?