MikroKopter - Forum » Electronics » What glue for ACC upgrade?

What glue for ACC upgrade?

Neues Thema Antwort

Seite: 1

Autor Neuer Beitrag
Mitglied
Registriert seit: Aug 2015
Beiträge: 2
I'm upgrading a FC with the new Z_ACC according to:
http://wiki.mikrokopter.de/en/FlightCtrl_ME_2_2_ACC
Any recommendations for glue? I imagine that the ACC board will get hot during soldering.
Some post mentions "Pattex" glue - but there are many types ...
Mitglied
Registriert seit: Apr 2011
Beiträge: 3568
Ort: Münsterland
Use UHU, Pattex..... etc.
Mitglied
Registriert seit: Aug 2015
Beiträge: 2
OK. I chose an epoxy resin (I had some R+G, System L (processing time 1 h, curing time 24 h)). The other glue I have is rated at 110 degrees Celsius and I imagine that a copper plane (if present) could reach higher temperatures during soldering and I don't know whether it will degrade permanently or recover its strength when cooling down.

Neues Thema Antwort

Seite: 1

MikroKopter - Forum » Electronics » What glue for ACC upgrade?