MikroKopter - Forum » Electronics » Mavlink from MKGPS

Mavlink from MKGPS

Neues Thema Antwort

Seite: 1

Autor Neuer Beitrag
Mitglied
Registriert seit: Oct 2010
Beiträge: 1482
Ort: Copenhagen, Denmark
Is it possible to feed upcoming Alexmos firmware with GPS data from the MK GPS ?

http://forum.basecamelectronics.com/index.php?p=/discussion/2175/accounting-for-drift-gpsekf-andor-flight-controller-integration
Entwickler, Admin
Registriert seit: Feb 2006
Beiträge: 5794
Ort: Ostfriesland
Yes, if they choose a protocol, we can generate that and use the second UART of the FC3.0
Mitglied
Registriert seit: Oct 2010
Beiträge: 1482
Ort: Copenhagen, Denmark
I am using the smart osd on my platform. Can I have both running at the same time?
Mitglied
Registriert seit: Jun 2013
Beiträge: 1262
Ort: Luxembourg
wizprod meinte
I am using the smart osd on my platform. Can I have both running at the same time?

The Smart-OSD, like the EPI-OSD, receives its data from the NaviCtrl Debug serial port (on NaviCtrl V2.x). On FlightCtrl V3.0 this serial port is a Molex port called "UART (Update)" and is repeated on "Pads Serial" (requires soldering).

The port that HolgerB refers to must be UART2.
Mitglied
Registriert seit: Oct 2010
Beiträge: 1482
Ort: Copenhagen, Denmark
Ah, nice one addition on the FC3!
Mitglied
Registriert seit: Jul 2010
Beiträge: 1
hi people

i have FC 2.5 setup with NaviBoard 2.1
how to connect alexmos gimbal with mavlink on my setup?

i need it to fix the Roll issue on accellerations as shown on the following video

https://www.youtube.com/watch?v=yqsWTf2uV1g#action=share

in the video AlexMoskalenko did it with PixHawk that has a MavLink connection that is supported by basecam board
« Bearbeitet von anaka am 17.10.2017 14:13. »

Neues Thema Antwort

Seite: 1

MikroKopter - Forum » Electronics » Mavlink from MKGPS