MikroKopter - Forum » MikroKopter - general » Waypoint Flight Cam-Nick Value Question

Waypoint Flight Cam-Nick Value Question

Neues Thema Antwort

Seite: 1

Autor Neuer Beitrag
Mitglied
Registriert seit: Nov 2012
Beiträge: 228
Ort: Ankara
Dear @LotharF

I have a question about that parameter?

On Wiki page-> * http://wiki.mikrokopter.de/en/WaypointGenerator/Area *; It is explained that "Tilt of the camera when it reaches the waypoint" and expressed in units of degrees.

1- Is it degree or servo value between 0-254 ?

2- If this parameter is servo value, when I manually set this servo value to the cam-nick value at the autonomous flight, the camera nick value is not in the same position as manually position.

I took the video about this question

Here -> Video
Mitglied
Registriert seit: Nov 2012
Beiträge: 228
Ort: Ankara
If there are those who are curious about this issue;

Dear Lothar made a statement like this

this is a number added to the current setting of the servo value.
Maybe this page will make it clear to you:

CameraConnect&AlignCamera Wikipage


Issue is closed :)

Neues Thema Antwort

Seite: 1

MikroKopter - Forum » MikroKopter - general » Waypoint Flight Cam-Nick Value Question