MikroKopter - Forum » Flight-Ctrl » Problem after upgrade on FC 2.1

Problem after upgrade on FC 2.1

Neues Thema Antwort

Seite: 1

Autor Neuer Beitrag
Mitglied
Registriert seit: Mar 2017
Beiträge: 3
Hi!
Got a AD6 Hexa with 2.1 FC and navicontrol, upgraded those yesterday with the mk3usb to version 2.16
Now it wont fly, the motors does not start,
"Dont start without the SDcard and GPS" and calibrated the compass, still wont start ..
Have they changed the deadmanprocedure on startup or what may be wrong?

Thanks from Johan in Sweden
Mitglied
Registriert seit: Jun 2013
Beiträge: 1262
Ort: Luxembourg
carnageman meinte
Got a AD6 Hexa with 2.1 FC and navicontrol, upgraded those yesterday with the mk3usb to version 2.16
Now it wont fly, the motors does not start,
"Dont start without the SDcard and GPS" and calibrated the compass, still wont start ..
Have they changed the deadmanprocedure on startup or what may be wrong?

Thanks from Johan in Sweden

Good that you mention your are in Sweden.

Is the temperature below 0 C? Do you use FlightCtrl firmware 2.16a? Do you hear a strange 3-tome error sound when trying to start?

Then your problem is likely: "3-tone error sound after calibration for start". You need FlightCtrl firmware 2.16b which MikroKopter for some unexplained reason has hidden away.
« Bearbeitet von Foersom am 09.03.2017 14:20. »

Neues Thema Antwort

Seite: 1

MikroKopter - Forum » Flight-Ctrl » Problem after upgrade on FC 2.1