MikroKopter - Forum » BL-Ctrl » BL Error 16 current measurement suddenly after storage

BL Error 16 current measurement suddenly after storage

Neues Thema Antwort

Seite: 1

Autor Neuer Beitrag
Mitglied
Registriert seit: Oct 2014
Beiträge: 9
I've had my heavy lift unit stored in a large pelican case for 6 months or so, and when I took it out today I'm getting an error 32 for the BL self test at address 5, which turned out to be an Error 16, but all the wiki says is "current measurement"

I had it up for a spin right before it got stored, nothing changed between then and now...any ideas what's up?

It's a double quadro v3 redundant, and I'm getting the error with or without motors connected.

Might be unrelated, but when I run the motor test, the motor at address 4 (on the bottom from 5) will not start until I get to "3" on the slider. at 1 or 2 it will spin once then stop, then spin once then stop, repeatedly. All other motors start fine at 1.
Mitglied
Registriert seit: Apr 2007
Beiträge: 2351
Ort: Hesel
Hmm, low Battery?

Neues Thema Antwort

Seite: 1

MikroKopter - Forum » BL-Ctrl » BL Error 16 current measurement suddenly after storage