Following this thread http://forum.mikrokopter.de/topic-31081-1.html I got two new frames, the hexa is alive and working nicely, the frame is very strong, rigs are very thin an light but its diameter make them very strong, the Octo is on the way.

Materials are first quality and Klaus of http://www.kopter4u.eu/ made a very precise job, he is a very nice person too that helped me a lot by email and Skype too, thank you!

externer Link:

externer Link:

externer Link:

externer Link:

externer Link:

externer Link:

externer Link:


This is the Hexa with my old landing gear
externer Link:

This is the Octo kit, I am not sure about tilting the motors like suggested in the Wiki

externer Link:

460 grams total weight

913 mm motor center to motor center, seems ok for the APC 13"

externer Link:

It look´s nice ;-),

Oggi è una festa, Lunedi di Pasqua, Giordano !!!

Poiché non è armeggiato. Sembra bello, quello che hai costruito lì.

È già, é già :-) *lol

Buona Giornata

Klaus

Hello Giordano,

when is the maiden flight instead of your OktoKopter?

Il buon salame da te è, purtroppo, completamente divorato :-(

Ciao Klaus

Klaus, your translator is worst than my english

I am waiting for the motor screws and the motors cable that are short, I think next week will fly hopefully

What is the minimum space between propellers? I think I'll have 15 mm if I use 13".

Giordano,

it´s Google translator ;-)

I think, 15 mm must be ok, but not smaller.

If i back from Turkey next Week, i have to visit Campogalliano for a new Salami *lol

Salame and Parmesan cheese are waiting for you

I am happy to see you again Giordano :-)))))

I have the screws and ready to install but I had to order motor cables too because the thinnest I have at home is 14AWG so I must wait for 18AWG

Some pics, octo is near alive...
externer Link:

externer Link:

externer Link:

externer Link:

externer Link:

externer Link:


Anyone knows how to setup the mixer table with radial octo and motor 1 in front? There is no preset in the Mk tool

Thank you

It's easy to make-your own mixer-table Look into it, then you also know how to fix them

Thank you

externer Link:


externer Link:


externer Link:


Octo flew flawlessy, 3600g with 2x5000 4S 20C around 35 Ah in hovering

Look´s very gooood :-), Did this Okto flying *ggg

I have some Okto´s on Stock ;-)


Klaus

Lanzo,

It looks great. What is the diameter of the CF tubes and type of motors are you using?

Thanks
Manuel

@Manuel

The diameter of the Tubes is 22mm, 1mm thickness. Motors are this http://www.kopter4u.eu/epages/63398907.sf/de_DE/?ObjectPath=/Shops/63398907/Products/2801

Best Regards Klaus

Sorry Manuel I forgot to check the thread

p.s. você è Brasileiro?

@lanzo
Il mio negozio è ora disponibile anche in lingua italiana
@Manuel
Minha loja é em breve disponível também em Português

Best regards

CamLifter (Klaus)