MikroKopter - Forum » Software » New Firmware V1.10 for BL V3

New Firmware V1.10 for BL V3

Neues Thema GESCHLOSSEN

Seite: 1

Autor Neuer Beitrag
Entwickler, Admin
Registriert seit: Feb 2006
Beiträge: 5768
Ort: Ostfriesland
Hello MK-Pilots,

today we released a new firmware for the BL-V3.

* better protection against high current peaks during operation
* Improved motor-start by a self-learning start phase
* internal speed limitation (Max RPM is 200.000 devided by the number of magnets -> 16.666 RPM if you have 12magnets)
* Prepared for redundant FC-Operation
* Safer behavior while operation without propellers
* Integrated watchdog that restarts the BL controllers in case of a failure
* small bug fixes

Here you can find the update and some examples of the connectors.
http://www.mikrokopter.de/ucwiki/en/BL_V3Update

We strongly recommend to update your V3-Boards!
If you can't make the update on your own, you can also send the board to us and we will upgrade it for you.

Thiago made a video how to update the BLs:
externer Link:
User image


Regards,
Holger
« Bearbeitet von HolgerB am 13.10.2014 16:47. »
Entwickler, Admin
Registriert seit: Feb 2006
Beiträge: 5768
Ort: Ostfriesland
Update:
The latest version is now 1.08
« Bearbeitet von HolgerB am 13.10.2014 16:48. »
Entwickler, Admin
Registriert seit: Feb 2006
Beiträge: 5768
Ort: Ostfriesland
Update:
The latest version is now 1.10

Neues Thema GESCHLOSSEN

Seite: 1

MikroKopter - Forum » Software » New Firmware V1.10 for BL V3