MikroKopter - Forum » Public BETA » Failsafe Problem (solved) of 2.08a, and altitude Problem

Failsafe Problem (solved) of 2.08a, and altitude Problem

Neues Thema Antwort

Seite: 1

Autor Neuer Beitrag
Mitglied
Registriert seit: Jul 2009
Beiträge: 114
Ort: Hong Kong
Hello,

(1)I have tried failsafe today, the behaviour is better.
But there is a problem.
When I using "Failsafe channel", everything is OK.
If I turned off the Transmitter, the copter will stay at the last place, It was not come back. What is the reason?
I think if someone's battery of transmitter run out, what the copter will do?

(2)By the way, the behaviour of climb and down is fine. But the altitude is not good when I flying fast.
Sometimes, it will not remain at a certain height. If I flying it faster, altitude has more change. Maybe it's interfered by the wind?

Regards,
Bubble
« Bearbeitet von Bubble am 18.10.2014 13:09. »
Entwickler, Admin
Registriert seit: Feb 2006
Beiträge: 5768
Ort: Ostfriesland
Can you send me the logfile please?
Does the MK beep if you switch off the transmitter?
Which transmitter do you use?
Mitglied
Registriert seit: Jul 2009
Beiträge: 114
Ort: Hong Kong
HolgerB meinte
Can you send me the logfile please?
Does the MK beep if you switch off the transmitter?
Which transmitter do you use?

(1)Yes, I will send E-mail.
(2)I think I did not hear it.
(3)My transmitter is Hott MC-20.

When I turned off the transmitter, I think maybe the copter received and hold the last transmitter data? Or the intermediate values?
« Bearbeitet von Bubble am 18.10.2014 11:45. »
Entwickler, Admin
Registriert seit: Feb 2006
Beiträge: 5768
Ort: Ostfriesland
The MK must beep when you switch off the tranmitter - even on ground before start.
If it doesn't do that, you must change the failsafe setting in the receiver!
Mitglied
Registriert seit: Jul 2009
Beiträge: 114
Ort: Hong Kong
HolgerB meinte
The MK must beep when you switch off the tranmitter - even on ground before start.
If it doesn't do that, you must change the failsafe setting in the receiver!


Sorry, I have tried again, it's not beep.
Then, I change the failsafe setting in the receiver, in the Menu "RX FAIL SAFE"---"mode", it says "hold",
So, I change it to "OFF". The copter begin to beep when I switch off the tranmitter.

I think maybe the problem is solved, I will try it tomorrow.
Thanks to you.

Regards,
Bubble
« Bearbeitet von Bubble am 18.10.2014 13:04. »
Mitglied
Registriert seit: Feb 2012
Beiträge: 1857
Iam pretty sure that you fixed it. Your problem sounded for me like that hold in the Fail Safe settings was enabled, what you find out yourself meanwhile. MK failsafe can only work if the RX Failsafe is off. So now, everything should work like expected.
Entwickler, Admin
Registriert seit: Feb 2006
Beiträge: 5768
Ort: Ostfriesland
bubble meinte
Then, I change the failsafe setting in the receiver, in the Menu "RX FAIL SAFE"---"mode", it says "hold",
So, I change it to "OFF". The copter begin to beep when I switch off the tranmitter.

That's it - you fixed it
Mitglied
Registriert seit: Jun 2013
Beiträge: 1223
Ort: Luxembourg
bubble meinte
Then, I change the failsafe setting in the receiver, in the Menu "RX FAIL SAFE"---"mode", it says "hold",
So, I change it to "OFF". The copter begin to beep when I switch off the tranmitter.

I am curious. What menu is this? Is this some setup program for a specific receiver?

On is it on Graupner MX-20 RC transmitter like explained in this thread?
Mitglied
Registriert seit: Jul 2009
Beiträge: 114
Ort: Hong Kong
Foersom meinte
bubble meinte
Then, I change the failsafe setting in the receiver, in the Menu "RX FAIL SAFE"---"mode", it says "hold",
So, I change it to "OFF". The copter begin to beep when I switch off the tranmitter.

I am curious. What menu is this? Is this some setup program for a specific receiver?

On is it on Graupner MX-20 RC transmitter like explained in this thread?


The setup is in hott receiver, you can change it in your hott tranmitter(mc-20, mx-20, mx-32.....)
You can see the Manual ;)
http://wiki.mikrokopter.de/en/HoTT?highlight=%28hott%29

Neues Thema Antwort

Seite: 1

MikroKopter - Forum » Public BETA » Failsafe Problem (solved) of 2.08a, and altitude Problem