MikroKopter - Forum » Electronics » no connection between NC 2.0 and MKTOOLS

no connection between NC 2.0 and MKTOOLS

Neues Thema Antwort

Seite: 1

Autor Neuer Beitrag
Mitglied
Registriert seit: Apr 2012
Beiträge: 13
Ort: FRANCE
i've got a FC2.2/NC2.0 + GPS : firmware is 2.06.

I just try to update the whole tower to 2.09 with my PC and mkusb.

When I'm connecting MKT to NC, i can't get any connection....1st time this probleme occurs....
I try a 2nd MKUSB : still the same problem....


I remove the NC + gps and connect only the Fc to mkusb : all is correct. Connection established.....

Can I connect the NC elsewhere to have a connection with MKTOOLS ? Do I have to send you back the card ??

However the copter is flying very well with this stuff: no error at all .

Regards

cedric
Mitglied
Registriert seit: Apr 2012
Beiträge: 13
Ort: FRANCE
NC connected alone with MKusb ( + 5V jumper closed ) : self test is ok, nothing seems wrong.

But unable to reset eeprom or upload any firmware.

Neues Thema Antwort

Seite: 1

MikroKopter - Forum » Electronics » no connection between NC 2.0 and MKTOOLS