MikroKopter - Forum » Construction » My new KlausP HexaXL and OktoXL

My new KlausP HexaXL and OktoXL

Neues Thema Antwort

Seite: 1

Autor Neuer Beitrag
Mitglied
Registriert seit: Oct 2011
Beiträge: 38
Following this thread http://forum.mikrokopter.de/topic-31081-1.html I got two new frames, the hexa is alive and working nicely, the frame is very strong, rigs are very thin an light but its diameter make them very strong, the Octo is on the way.

Materials are first quality and Klaus of http://www.kopter4u.eu/ made a very precise job, he is a very nice person too that helped me a lot by email and Skype too, thank you!

externer Link:
User image
externer Link:
User image
externer Link:
User image
externer Link:
User image
externer Link:
User image
externer Link:
User image
externer Link:
User image

This is the Hexa with my old landing gear
externer Link:
User image
« Bearbeitet von lanzo am 09.04.2012 12:10. »
Mitglied
Registriert seit: Oct 2011
Beiträge: 38
This is the Octo kit, I am not sure about tilting the motors like suggested in the Wiki

externer Link:
User image
Mitglied
Registriert seit: Oct 2011
Beiträge: 38
460 grams total weight

913 mm motor center to motor center, seems ok for the APC 13"

externer Link:
User image
Mitglied
Registriert seit: Jan 2012
Beiträge: 3216
Ort: München
It look´s nice ;-),

Oggi è una festa, Lunedi di Pasqua, Giordano !!!

Poiché non è armeggiato. Sembra bello, quello che hai costruito lì.

È già, é già :-) *lol

Buona Giornata

Klaus
« Bearbeitet von KlausP am 09.04.2012 17:26. »
Mitglied
Registriert seit: Jan 2012
Beiträge: 3216
Ort: München
Hello Giordano,

when is the maiden flight instead of your OktoKopter?

Il buon salame da te è, purtroppo, completamente divorato :-(

Ciao Klaus
Mitglied
Registriert seit: Oct 2011
Beiträge: 38
Klaus, your translator is worst than my english :)

I am waiting for the motor screws and the motors cable that are short, I think next week will fly hopefully :)

What is the minimum space between propellers? I think I'll have 15 mm if I use 13".
Mitglied
Registriert seit: Jan 2012
Beiträge: 3216
Ort: München
Giordano,

it´s Google translator ;-)

I think, 15 mm must be ok, but not smaller.

If i back from Turkey next Week, i have to visit Campogalliano for a new Salami *lol
Mitglied
Registriert seit: Oct 2011
Beiträge: 38
Salame and Parmesan cheese are waiting for you :)
Mitglied
Registriert seit: Jan 2012
Beiträge: 3216
Ort: München
I am happy to see you again Giordano :-)))))
Mitglied
Registriert seit: Oct 2011
Beiträge: 38
I have the screws and ready to install but I had to order motor cables too because the thinnest I have at home is 14AWG so I must wait for 18AWG :P
Mitglied
Registriert seit: Oct 2011
Beiträge: 38
Some pics, octo is near alive...
externer Link:
User image

externer Link:
User image

externer Link:
User image

externer Link:
User image

externer Link:
User image

externer Link:
User image


Anyone knows how to setup the mixer table with radial octo and motor 1 in front? There is no preset in the Mk tool

Thank you
Mitglied
Registriert seit: Oct 2010
Beiträge: 1482
Ort: Copenhagen, Denmark
It's easy to make-your own mixer-table :) Look into it, then you also know how to fix them :)
Mitglied
Registriert seit: Feb 2012
Beiträge: 13
http://forum.mikrokopter.de/topic-32884.html
Mitglied
Registriert seit: Oct 2011
Beiträge: 38
Thank you
Mitglied
Registriert seit: Oct 2011
Beiträge: 38
externer Link:
User image

externer Link:
User image

externer Link:
User image

Octo flew flawlessy, 3600g with 2x5000 4S 20C around 35 Ah in hovering
Mitglied
Registriert seit: Jan 2012
Beiträge: 3216
Ort: München
Look´s very gooood :-), Did this Okto flying *ggg

I have some Okto´s on Stock ;-)


Klaus
Mitglied
Registriert seit: Apr 2007
Beiträge: 159
Lanzo,

It looks great. What is the diameter of the CF tubes and type of motors are you using?

Thanks
Manuel
Mitglied
Registriert seit: Jan 2012
Beiträge: 3216
Ort: München
@Manuel

The diameter of the Tubes is 22mm, 1mm thickness. Motors are this http://www.kopter4u.eu/epages/63398907.sf/de_DE/?ObjectPath=/Shops/63398907/Products/2801

Best Regards Klaus
Mitglied
Registriert seit: Oct 2011
Beiträge: 38
Sorry Manuel I forgot to check the thread

p.s. você è Brasileiro?
Mitglied
Registriert seit: Jan 2012
Beiträge: 3216
Ort: München
@lanzo
Il mio negozio è ora disponibile anche in lingua italiana
@Manuel
Minha loja é em breve disponível também em Português

Best regards

KlausP (Klaus)
Mitglied
Registriert seit: Jul 2015
Beiträge: 5
It look´s nice ;-),

Neues Thema Antwort

Seite: 1

MikroKopter - Forum » Construction » My new KlausP HexaXL and OktoXL