MikroKopter - Forum » Electronics » Smart Electronics OSD V3.0 problems. Please help.

Smart Electronics OSD V3.0 problems. Please help.

Neues Thema Antwort

Seite: 1

Autor Neuer Beitrag
Mitglied
Registriert seit: Jun 2011
Beiträge: 338
Dear all,

I own a Smart OSD V3.0, and today i realized that their website is down... Is anyone having instructions for it? Also, it seems that by default is shows cam 2 and not cam 1. How can I change that? I have some issues with it, that they did not exist with the previous version of hardware. Some people mentioned there is something we can solder on the board to solve the horizontal scan lines problems. Any idea again? Finally, is there anything newer and or better on the market for Mikrokopter? All I need is some nice OSD information on my pilot's monitor. Thank you in advance for your help.

Regards,
Dimitris
Mitglied
Registriert seit: Apr 2007
Beiträge: 2284
Ort: Hesel
Have you seen this Video?
https://www.youtube.com/watch?v=xb8jCUVWhVM

and here the installation Video...
https://www.youtube.com/watch?v=lCq0Uw7airs
« Bearbeitet von roerich_64 am 14.04.2017 14:45. »
Mitglied
Registriert seit: Jun 2011
Beiträge: 338
Thank you for your response. It does not really help. I do not know how to activate camera 1 as the default camera. If i remember well, you have to do something on the board, but that information is not available anymore. The problem, is that the OSD causes something like horizontal sync problem (the image rolls up continuously). And i know it is the OSD because I tried different cameras and the problem persists, while if i remove the OSD, the image from the camera is perfect. The designer of the board, mentioned that for some cameras, you need to do a modification on the board, but as i said, i cannot find that information anymore... :( Thank you for links anyway. Still useful. :)

Neues Thema Antwort

Seite: 1

MikroKopter - Forum » Electronics » Smart Electronics OSD V3.0 problems. Please help.